Eprin
CZ|EN
HomepageProductsApplicators and robotsLabel applicator Collamat C4300

Label applicator Collamat C4300

Collamat_C4310_ECO_1
Collamat_C4300_1Collamat_C4310_ECO_2Collamat_C4310_ECO_5Collamat_C4310_ECO_6Collamat_C4310_ECO_4Collamat_C4310_ECO_3Collamat_C4310_ECO_7

The Collamat® 4300 labeller is the perfect solution for most standard applications. Its reliability leads to high availability.

The Collamat® 4300 is compact and space-saving and easy to operate, i. very short instruction and very fast product change. The Collamat® 4300 has an attractive price for a reliable and accurate labelling solution. As with all Collamat® models, the modular design allows easy integration into existing production lines as well as machine configuration thanks to the variable applicators.

Developed for semi-automatic or fully automatic use, the Collamat® 4300 offers the optimal solution for labelling in smaller productions with high demands on consistent functionality, accuracy and reliability.

If you require flexible label printing, we will add an INK-JET printer or a hot stamping unit to your applicator. Following the layout, you can choose between R – right or L – left configuration.

Features:

  • Flexibility – Wide application range thanks to the availability of various applicators
  • for specific products; a spring loaded flap applicator for pass-through labelling of uneven products; flap applicator with magnet for pass-through labelling in small cavities or of light products; blow-on for labelling without contact with the product; tamp-on for stand-still labelling or labelling in cavities.
  • Collamat® design – Electronics, drive unit, backing paper re-winder and control panel integrated in one, space-saving unit.
  • Modularity –The Collamat® well-known module rail design facilitates the installation of printers, scanners or other devices. Easy adaptation to new applications. Fast change-over times.
  • Easy operation – Settings can easily be changed by four potentiometers.
  • Fast set up – Set the label scanner, pre-dispensing, label position and application speed – and you are ready to work.
Request product

Typ

C4300

Operational speed

1 – 25 m/min (3.3 – 82 ft / min)

Operational width

95 mm (3 3⁄4”) or 160 mm (6 1⁄4”)

Labelling accuracy

± 1 mm (1/32”)

Min. label length

10 mm (3/8”)

Max. label reel diameter

250 mm (9 7/8”) or 350 mm (13 3⁄4”)

Connectivity

Outputs: Signals for printer and error
Inputs: Goods scanner and end of label detection

Settings

By potentiometers

Drive

2-phase stepper motor

Control

Microprocessor

Voltage

115 / 230 V; 60 / 50 Hz; 138 VA
Feed button for manual label dispensing, i.e. threading the label web

Applicators

Spring loaded flap, flap with magnet, blow-on, tamp-on

Version

Right or left

Options

Side labelling kit, extended peel plate, pressure brushes, label end detection, digital control box, etc.

Approbation

CE

All data are indicative and may be subject to alteration

Dokumenty ke stažení:

Adobe PDF DokumentCollamat přehled produktů

Other products

Label applicator Collamat C6600

Label applicator Collamat C6600
Thanks to its modular design, the Collamat® 6600 can be expanded for virtually any task. The stepper motor allows speeds of up to 30 m / min. Parameter settings with pre-setting and sticking position independent of the labelling speed allow a very simple operation. With its comfort, quality and outstanding performance, it gives an optimal price-performance ratio. As with all Collamat®, the modular design allows easy integration into existing production lines, as does the versatile and customisable adapter system for a wide variety of products. Features: Over edge applications without stopping the product flow Securing application settings with the Datahold function Adjustment of the label position on the product by potentiometer setting Encoder controlled speed synchronisation minimising the risk of faulty labelled products Minimal wear and tear combined with minimal maintenance need guarantees minimal downtime Easy adaptation or re-configuration for new application requirements due to the use of a wide range of accessories
View detail

Label applicator Collamat C2610 ECO

Label applicator Collamat C2610 ECO
Your first step. This labeller is intended as the first step to an automated labelling process. Maximising the production output and quality is evident. High reliability is achieved through a simple and robust concept. Set up of the labeller on various lines and to various products is easiest possible.   Collamat® 2610 fits ideal into either smaller productions for test series or for promotional labelling in existing lines. All to a very competitive price. We will be happy to advise you on your idea of industrial label application.   Features: Minimal space required, ideal to fit into existing production lines For top, bottom, and side applications Fast set up and short change-over times Low cost makes small series and promotional labelling attractive Process automation increases production output Self explanatory control panel minimises operating error No compromise on reliability or quality
View detail

Label applicator Collamat C4310 ECO

Label applicator Collamat C4310 ECO
Label applicator Collamat C4310 ECO is the top-selling model of ECO product line and finds its use within production lines with standard output.   Naturally, basic philosophies of the producer, such as easy control, long working life, and low space demands, remain unchanged even with this model. The C4310 ECO compact applicator has an integrated unwinding unit with 250mm in diameter, 700mm long bearing arm, and is equipped with the system of a fixed detachable edge and a spring-loaded pressure roller for adjusting the thickness of a product within the range of ±5mm. The driving unit with a powerful stepper motor is especially excellent when it comes to its high speed within 1-25m/min and application accuracy of ± 0.7mm.   If you require flexible label printing, we will add an INK-JET printer or a hot stamping unit to your applicator. Following the layout, you can choose between R – right or L – left configuration.  
View detail

Label applicator Collamat C7310 ECO

Label applicator Collamat C7310 ECO
Label applicator Collamat® 7300 is high performance labeller is the perfect solution for any standard application, even at high speeds or high throughput. The Collamat® 7300 is used in all areas of industry, such as food, beverage, pharmaceutical, etc., to warehousing and logistics.   Thanks to its proven design and sophisticated mechanical design, the Collamat® 7300 can be offered at an optimal price / performance ratio. Its reliability leads to high availability. The Collamat® 7300 is easy to use, i. very short instruction and very fast product change. The powerful motor allows dispensing speeds of up to 50 m / min, ideal for modern production lines. The Collamat® 7300 can therefore be easily integrated into production lines with current speeds and high requirements.   It is compact and space-saving as easy to use. Another example of our motto "Simplicity is the prerequisite for reliability". Developed primarily for fully automatic use, the Collamat® 7300 offers the optimal solution for labelling in production lines with high requirements, with consistent functionality, accuracy and reliability.   Features: Speed synchronisation  – Automatic continuous adjustment to the actual line speed by encoder. Zero down time  – Two units operating in the non-stop mode guarantee you continuous production flow with minimal manpower. User-friendly  – With the intuitive menu structure the handling is safe and simple.  Memory  – The capability to store 32 programs enables quick and reliable product change-over.  Precise labelling  – Constant stop resolution over the whole speed range. Monitoring  – Current application data and error messages can be observed by the operator on the monitor’s display or read out on a PC.
View detail

Label applicator Collamat C2600

Label applicator Collamat C2600
The first step. This labeller is the first step to an automated labelling process. The maximisation of production output and quality is obvious. High reliability is achieved through the simple and robust design. Setting up the labeller on different lines and different products is very easy. Collamat® 2600 is ideal for either smaller series production runs or for advertising lettering in existing lines. And all for a very competitive price. Features: Minimal space required, ideal to fit into existing production lines For top, bottom, and side applications Fast set up and short change-over times Low cost makes small series and promotional labelling attractive Process automation increases production output Self explanatory control panel minimises operating error No compromise on reliability or quality  
View detail
We know our job and understand your needs. More than 30 years of experience in automatic identification.
Kontaktujte nás
South Moravia
This international sales marketing campaign was realized with the financial support of the South Moravian Region through the Project „Centre for International Trade“
Centre trade